EDONiTE Fluted Load-Bearing Columns

These durable classically proportioned columns are created with full depth ionic flutes to create the elegant vertical shadowing effects which have enhanced the beauty of fine architecture for centuries. EDONiTE Fluted columns are load bearing, but can be provided manufactured in halves for reassembly around structural supports. Columns manufactured in halves are provided with an overlapping joint detail to facilitate realignment and rejoining of the column halves.

EDONiTE load bearing columns are available with a variety of capital and base styles. Column styles can vary from straight to entasis, square in plan and fluted.

Backed by a limited lifetime warranty, EDONiTE Fluted columns are simple to install, and can be specified for Class 1 fire rating upon request. EDONiTE Fluted columns are currently available in many popular classical designs from 14" to 36" in diameter.

	COLUMN DIAMETER LOAD IN LBS. 12" 6,000 14" 8,000 16" 10,000 18" 12,000 20" 14,000 22" 16,000 24" 18,000 30" 24,000

The chart lists recommended dead load values. These loads apply to full columns installed according to EDONiTE installation instructions. All split columns and pilasters are non-load bearing. Load is to be applied concentrically through axis of column. Loads are valid only if applied uniformly between full area of column shaft ends. Load values are provided as a convenience and are not exact. Consult a structural engineer for accurate load estimates.