COLOR

 

 

 

EDON COLOR INFORMATION

 

 

 

 

All of Edon’s FRP products are produced with an integral, white, polyester gelcoat color (we do not use paint). At no additional cost Edon can provide your order with almost any single, solid, custom color, with the exception of products needing final finish after installation (column covers).

 

Edon does not have color charts for color choice. We suggest selecting from any paint manufacturer’s color wheel (Benjamin Moore, Sherwin Williams, etc.). Please submit a color chip with your purchase order; we will then produce a color match and submit FRP samples for customer approval.

 

Custom special gelcoats such as those with a granite-look or metal-flake can be provided at an additional charge. If you are wishing to match a metallic color please note that the ability to do so with gelcoat is very limited, please contact your salesperson.

 

Edon’s standard finish is a smooth satin/matte. At an additional cost Edon can provide textured finishes, within a few limitations. Please contact your salesperson.

 

All custom colors require two to three weeks to formulate a match and provide an approval sample. After sample approval it takes one to four weeks to receive the gelcoat order from our manufacturers. Note that Edon can not start manufacturing an order without the gelcoat as it is the first thing sprayed into the molds.

 

FRP can also be painted after delivery to the customer. We recommend using a high quality paint designed for fiberglass application, following the manufacturer’s instructions. For the best results Edon recommends the use of a urethane base paint for all exterior applications.